projet-fpga/DCC_Bit_0.vhd

82 lines
1.3 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
entity dcc_bit_0 is
port(
reset : in std_logic;
clk_100MHz : in std_logic;
clk_1MHz : in std_logic;
go : in std_logic;
fin : out std_logic;
dcc_0 : out std_logic
);
end dcc_bit_0;
architecture behaviour of dcc_bit_0 is
type state is (idle, out_0, out_1);
signal cs, fs : state;
signal inc_cpt : std_logic;
signal cpt : integer range 0 to 200;
signal out_value : std_logic := '0';
begin
dcc_0 <= out_value;
--MAE
process(clk_100MHz, reset)
begin
if reset = '1' then fs <= idle;
elsif rising_edge(clk_100MHz) then
if cs = idle then
fin <= '0';
out_value <= '0';
if go = '1' then
inc_cpt <= '1';
fs <= out_0;
end if;
elsif cs = out_0 then
out_value <= '0';
if cpt > 99 then fs <= out_1;
end if;
elsif cs = out_1 then
out_value <= '1';
if cpt > 199 then
fs <= idle;
fin <= '1';
inc_cpt <= '0';
end if;
end if;
cs <= fs;
end if;
end process;
--Compteur de Temporisation
process(clk_1MHz, reset)
begin
if reset = '1' then
cpt <= 0;
elsif rising_edge(clk_1MHz) then
if inc_cpt = '1' then
cpt <= cpt + 1;
end if;
end if;
end process;
end behaviour;